| WATER-TREATMENT SYSTEM
(1) STORAGE TANK
(2) WATER PUMP
(3) MICRO FILTER HOUSING
(4) STORAGE TANK
(5) WATER PUMP
(6) MICRO FILTER HOUSING
(7) STORAGE TANK
(8) U.V STRILIZER
(9) WATER PUMP(10) MICRO FILTER HOUSING
(11) U.V STRILZER
(12) STEAM TANK
(13) RINSER TANK
(14) RINSER PUMP
|
| UNSCRAMBLER
This machine is the most efficient solution to automatically feed plastic & glass bottles to suitability and transfer to next process, by easy operation.
|
| ROTARY TYPE RINSER
Rotary Type Rinser is a equipment to rinse Pet & Glass bottles.
Bottle is rinsed after nozzle enter into bottles to enhance rinsing ability.
Minimal water consumption is achived by adopting no-bottle, no rinsing system.
|
| Filling M/C
Filling machines handle bottles by their neck ring instead of utilizing lift cylinders.
The mechanism provides the necessary contact pressure during filling process.
When changing over to another bottle size, only carrier plates is changed.
|
| WARP-ROUND PACKER
Wrap-Round Packer packs the products after feeding products on various kinds of corrugated sheet boxes with prompt job change and it has the ability of fine adjustment and accurate timing using pulse controller.
Safety device provide prompt & correct treatment for trouble.
|
| PALLETIZER DEPALLETIZER
Palletizer - Depalletizer is suitable to handle plastic carton, shrink-wrap packs, new bottles from glass factory and cans.
Depending on the type of container to be handled, machine can use several types of accessories to meet the palletization requirements fully.
|
| PC ROTARY TYPE RINSER
PC Rotary Type Rinser is suitable to rinse 5 gallon bottle and it blows sterile Water into inside & outside of bottles .
The function of this machine is to do pre-washing before washer. |
| PC LINE TYPE FILLER
Line Type Filler Machine have a vaccum device to remove foam when filling will be processed and water in vaccum device can be refilled through assistant water tank. Also, this machine can defend from the schrinking of bottle by means of automatic control of vaccum system.
|
| CASE PACKER
Grip cylinder which is going down in main cylinder connecting upper part, grip filled and aligned bottles and bottles move into lower part. And then, bottles are processed in bottle conveyor operating on forward cylinder.
|
